0086-532-83762356
The equipment is used for manual blowing operation of subway traction motors. The blowing operation is carried out in a closed working room, with the motor placed on a rotating trolley. The dust filtration device sends the purified gas into the fan and then dischargesit indoors or outdoors. The emission concentration complies with the comprehensive emission standards for air pollutants (GB16297-1996).
| Items | Technical Parameters |
| Power Supply | AC380V, 50HZ |
| Air Volume | ≥5000m3/h |
| Pressure | -1950Pa |
| Filtration Method | Cartridge Filter |
| Compressed Air Source | 0.1~0.6Mpa |
| Dust Collector Fan Power | 5.5Kw |
| Total Equipment Power | 11Kw |
| External Dimensions of Purge Chamber | 2000×2000×2600mm |
Train washing machines are used for the cleaning operations of the exterior surfaces of variouskindsoftrains (sides, side top arcs, top surfaces, and end faces).
The equipment can perform synchronous lifting operations of a whole or a half of a train set without decoupling, if can also lift one single carriage.
This system enables synchronized lifting of multiple coupled train sets without uncoupling, facilitating inspection,maintenance, repair, and replacement of mechanical, el...
The Electric Road-Rail Shunter is designed for single-unit traction during rail train decoupling and coupling operations.
The electric road-rail shunter (axle type) adopts a battery-powered, four-wheel-drive and four-wheel-steering (4WS+4WD) structure with a high-capacity battery for extende...
The 600-ton Diesel-Powered Road-Rail Vehicle is engineered for shunting railway passenger and freight cars. It provides exceptional traction on rail tracks, ensuring prec...
