0086-532-83762356
The test bench is used for the pressure - holding and air - tightness tests of air springs of rail vehicles such as EMUs and subways.
| Items | Technical Parameters |
| Max Load(KN) | 200 |
| Test height(mm) | 265±2 |
| Gas source pressure(MPa) | 1.2 |
| Operation time for a single air spring(min) | ≤15 |
| Power supply parameters | AC380V（±10%） 50Hz 35KW |
| Accuracy of pressure sensor(FS) | 0.1% |
| Dimensions of the test bench(mm) | 1500 x 1100 x 2230 |
| Dimensions of the control cabinet (mm) | 710 x 500 x 1600 |
Train washing machines are used for the cleaning operations of the exterior surfaces of variouskindsoftrains (sides, side top arcs, top surfaces, and end faces).
The equipment can perform synchronous lifting operations of a whole or a half of a train set without decoupling, if can also lift one single carriage.
This system enables synchronized lifting of multiple coupled train sets without uncoupling, facilitating inspection,maintenance, repair, and replacement of mechanical, el...
The Electric Road-Rail Shunter is designed for single-unit traction during rail train decoupling and coupling operations.
The electric road-rail shunter (axle type) adopts a battery-powered, four-wheel-drive and four-wheel-steering (4WS+4WD) structure with a high-capacity battery for extende...
The 600-ton Diesel-Powered Road-Rail Vehicle is engineered for shunting railway passenger and freight cars. It provides exceptional traction on rail tracks, ensuring prec...
